重庆川仪Royce Mode195A传感器用于测量m留L级水中溶解氧。主要用于野外连续DO检测和控制。，探头外形小巧，结构坚固，具有抗腐蚀性，是为苛刻环境要求而设计。用于废水处理、水体保护、农业和海洋学工业。Royce mode195ADissolved
Oxygen Sensor
Chongqing
Chuanyi Royce mode195Asensor can measure dissolved oxygen
concentration in solutions to the level of mg/L and can be used to detect and control
the outdoor DO continuously. Its probe is small in size, firm in structure and
of great anti-corrosion, all these are special designed to meet the requirement
of harsh service conditions. Royce mode195Ais mainly used in wastewater procession, water protection,
agriculture and oceanology.
重庆川仪溶解氧Royce ModeI95A传感器的主要特点如下：
坚固抗腐蚀结构
Pt阴极、铅阳极;
自动温度补偿;
在野外易于安装:
无需特殊工具;
更换膜片和电解液方便;
电极经久耐用，配有一盒膜片和一瓶电解液;
校验简单，在空气中或溶液中均可完成。
Main Technical Features
.Firm structure of great anti-corrosion feature
.Pt cathode and Pb anode
.Automatic temperature compensation
.Easy outdoor installation
.No dependence on special tools
.Easy to replace membrane and electrolyte
.Electrode has a long life time, another box of membrane and a
bottle of electrolyte is packed before shipment.
.Simple calibration which can be finished in air or solutions
使用维护
.使用时，必须安装膜片和电解液;
.装配电极时需要在电极前端和尾部的0形圈涂抹脂润滑油，以确保密封良好;
.棕色圆盘纸是使用在膜片制造上，膜片装配时应去掉;
.避免触摸敏感区域(中央)，不要碰伤、划破膜片，不要用硅酸脂润滑油污染膜片;
.电极的铂顶端是安装*敏感的区域，不要重击、擦伤，否则会损伤其表面，不允许铂与金或银(珠宝)接触;
.电极填充液添加至筒上刻度线处即可;
.电极体插入筒中，要很轻旋转式的推到前端0形圈以上1/8一处就可以了;
.装好后要检查膜片，确保膜片光滑和自由起皱.否则重装。
.Application and
Maintenance
.Install membrane and electrolyte while use
.Lubricate the front end of electrode and the O-ring at the rear end
when assembling electrode to ensure the well sealing
.Remove the circle brown paper in the membrane for the paper is used
for membrane manufacture.
.Do not touch the sensitive area (center), do not bruise or scratch
the membrane, or contaminate the membrane with Silicone ester lubricating oil
.The Pt end of the electrode is the most sensitive part, do not
strike or scratch this part, or the surface w川be damaged. Avoid the contact of Pt with gold and silver (jewelry)
.Optimum result shall reach the scale mark
.When insert the electrode into the barrel, slightly rotate the
electrode to the 1/8" point above
the O-ring
.Check the membrane after installation. Membrane shall be smooth OlherwisP
reinsta
咨询电话：023-68099522